Auction Date: October 31, 2020
Auction Time: 9:00 AM
Auction Type: Tool Auction
Auction Location:
50 Durlach Road, Ephrata, PA
1Tinsmith’s bench top 18” bending brake, G+
$10.00
12Bench top combination anvil/vise, patent date Sept. 22, 1914. Vise has pin-stop adjustable bar, G
$120.00
132 – Tinsmith tools: Niagara base w/ late spouting furrel roller machine, G; Peck, Stowe & Wilcox, wiring machine w/ bench stand
$85.00
30P.R. Short, pat. 5-11-1909, “Prince” combination brace/wrench w/ canvas roll of auger bits, G-Vg
$90.00
322 – Drilling devices: Greenfield (?) #80 off-set angle brace, F-G; S. & W. 2-19-1884, right-angle ratchet brace, G
$30.00
33Henry Brown Patent, brass braced wooden brace w/ James Beem, Sheffield, and push-button chuck. Brace has rosewood knurl, G+ (refinished)
$60.00
34Tray lot assorted tools: Penton & Son, spring-jaw caliper; rounding mallet; wooden spoke shave; T-handle scraper; small tapered auger; etc.
$30.00
356 – Assorted hatchets: claw-face “Tommy Axe”, Vg; C. Hammond #1 lathing hatchet; Plumb shingle hatchet; etc.
$65.00
367 – Assorted hammers: 3 – blacksmith rivet hammers; cobbler’s round; joiner’s flat-tail; blacksmith round punch
$45.00
385 – Assorted firmer chisels, F-G: 3/8” socket mortise; 3 – socket handle corner chisels; bevel top straight
$70.00
393 – Various hammers: unsigned H.W. stone mason’s “bush” hammer, F+; Hammond (?) #2-24oz. claw, G; blacksmith’s long tip punch hammer
$22.50
462 – Pin-poll carpenter’s adze: Germany “Stag marked” w/ square full poll, G+; unsigned hand wrought w/ flared octagon poll, F
$65.00
52W. Brady (Mt. Joy, or Lancaster, Pa.) reverse-poll dbl. bit posthole axe w/ long narrow edge
$80.00
534 – Assorted axe heads, G-Vg: H.W. round-poll shingling half hatchet; narrow mortise axe; Collins felling axe; Mann’s Superior Co., felling axe
$120.00
543 – H.W. butcher cleavers: M.B. w/ riveted strap mount; D.S. w/ solid handle; Village Blacksmith solid handle
$140.00
554 – Various long shank screwdrivers: H.W. from salvage file, G; “make-do” from salvage bayonet w/ turned wood grip; Wm. Johnson, Newark, NJ; T. Brown
$35.00
645 – Adjustable wrenches: Robinson S-handle; unsigned 6 ˝”, G+; Gellman Wrench Corp., “quick-adjust”, pat. 4-17-1923; Hand-E Wrench Co., pat. 9-20-1921, slide-adjust, Vg; Cochran “Speednut” Wrench
$60.00
655 – Various wrenches: Jenbro, British made, 6 ˝”; Crescent 10” dbl. end; W&B #1 alligator jaw; Gellman Wrench Corp. “Polly” adjustable; Kent #2 swing-jaw pipe wrench
$60.00
666 – Assorted “Monkey” adjustable wrenches, G-Vg, various sizes: H.D. Smith & Co; Russwin; Keen Kutter; W. Grippen; Tower (?); etc.
$100.00
675 – Various shaves: Stanley: #151 adjustable, Vg; #58, G; unsigned dbl, edge rounder, G; 2 – late model (light casting), Vg
$100.00
68Tray lot assorted measuring devices: 3 – Stanley try squares, G-Vg; unsigned 10” try square, Vg; Lufkin 100ft. tape measure, Vg; 3 – 6ft. pocket tape measures
$55.00
705 – Assorted small adjustable wrenches: B&C 6” “Monkey”, Vg; W. Baxter, dbl.-end, G; 3 – “no name”, F-G
$100.00
72Tray lot 6 – assorted hammers: 8oz. tack/claw, Vg; strap braced upholstery claw; glazier’s hammer; slating hammer; pin point tack; & veneer F-G
$75.00
75Tray lot assorted “new product” Stanley tools & parts: mandrels; hole saw; hole bit, router bits
$20.00
78Stanley “sweetheart” #2 bench plane, excellent restoration project, solid frame & all original parts, G
$180.00
79Metallic Plane Co. “Palmer’s & Storke’s Patents” 8 5/8” corrugated jack plane w/ adjustable throat, Vg.
$50.00
914 – Claw hammers: Bingham’s “farrier’s” claw, Vg; unsigned 12oz. bell poll, Vg; signed (?) 16oz. patented nail holder claw, G+; (?) Hammer Co. “farrier’s” claw, G+
$65.00
93Tray lot assorted leatherworking tools: awls; picks; multi-tools; stitching tools; clinching nails; etc.
$90.00
94Tray lot assorted pliers type tools: Lindstom, Sweden “flat-nose” w/ owner John Eberly, Reading; leather stretcher; wiring pliers; Blue Bird “beak-tip”; dentistry pliers; etc.
$60.00
95Tray lot assorted leather working tools: edge floats & edge beading tools; awls; picks; etc.
$75.00
97Tray lot assorted leatherworking tools: lg. plug cutter; lace slicing tool; 2 – heel shaves; wooden slickers; burnishing tool; etc.
$45.00
1012 – Wooden frame hack-saws. Both “bucksaw” framed: homemade green painted w/ metal cutting blade & twisted tension wire, G; saw-grip handled 16” bone saw w/ tension wire
$12.50
103Tray lot assorted hand wrought tools: heavy 1 Ľ” open-end wrench; twisting bar; pliers; pincers; screwdriver; “bed-bolt” screwdriver; etc.
$20.00
1042 – “Odd” handsaws: 18” w/ D.R.G.M. marked brass inlay braced handle, F; Richardson Bros. 26” w/ “tear-drop” cut-out blade, G
$140.00
10720” Oak “4-frame” fellow saw w/ mortise & tenon construction, bolt & nut tension (some bug damage)
$7.50
109Stanley oak bench top tool chest w/ box-joint construction, hinged door, interior door, F+-G
$30.00
110Unsigned oak tool chest w/ assembled collection of tools: Jennings brace; various auger bits; sliding-T bevel; 4” drawknife; claw hammer; etc.
$80.00
1142 – Wooden levels: Davis & Cook, “Cook’s Patent” 28” cherry adjustable w/ brass end caps, Vg; Stanley R&L #3 mahogany w/ brass tipped ends, G+
$30.00
1162 – 18” iron levels: Davis Level Tool Co., pat. 9-17-1867, adjustable w/ lattice open-work cast, chipped rail, F; Starrett (?), F-G
$60.00
119Davis Level & Tool Co. 12” ornate “Victorian” cast iron level (1 – vial tube replaced), Vg
$55.00
120Tray lot assorted machinist tools: 3 – 0-1” micrometers, Vg; depth gauge; feeler gauges; etc.
$45.00
1214 – Various levels: Dunlap “three-way” brass plate level; “no-name” rosewood & brass machine level, G; L.S.S. Co. 3 3/8” iron machine level, Vg; “no-name” 6” iron level, G
$50.00
122Tray lot assorted metal handle try & combination squares, F-G: Browne & Sharpe center-square; ‘no-name” bevel/square; Disston & Sons 6”; Stanley 7 ˝”; etc.
$50.00
1247 – Assorted measuring devices: machinist made 12” steel T-square, G; 5 – wooden handle sliding-T bevels, F-Vg; Eagle 10” “flush-T” bevel, G
$65.00
1253 – Claw hammers w/ metal braced handles: W. Burk (?) 16oz, G; unsigned 12oz, G; “no-name” 16oz w/ split-forge bracing, G
$55.00
1264 – Wooden handle try squares: unsigned 16” mahogany & brass handle w/ “bat-wing” inlay brace rivet plate, Vg; Crouch & Co. 10”, G; Stanley 8”, F; Stanley 6” mitre, F+
$60.00
1279 – Assorted Stanley tool catalogues: 4 – “blue cover” #34 catalogues, G; 2 – “yellow-cover” #34 catalogues, G-Vg; 1952, “light-blue” #34 catalogue; 1954, #54; 1950’s era #58
$50.00
1282 – Stanley “project” planes, P-F: “Victor” #20 compass/circular plane, brass braised crack on throat; #95 edge block, missing parts
$65.00
1303 – Various bench jack planes: Firestone “Supreme” 9”, G+; Millers Falls #900, Vg; Stanley Bailey #4, P
$75.00
131Tray lot assorted Stanley tools: #59 doweling jig w/ original box, G; #G12-247 block, Vg; 10” turned handle dove-tail saw, Vg; “Yankee” #41 push drill, Vg; 8oz. claw hammer, vg; “sweetheart” screwdriver, G+
$50.00
1392 – Stanley restoration project planes: #1 w/ aluminum handle, problems to bed, but good salvage parts; #2 “starter kit” parts missing & damage
$350.00
1412 – Stanley Bailey transitional bench planes, Vg: “sweetheart” #26; R&L #28 w/ pat. date blade
$50.00
1432 – Stanley R&L transitional bench planes: #37 wide smooth jack, G; #129-20” w/ Liberty Bell cap, circa 1902-10, G+
$35.00
1443 – Stanley planes: 2 - #40 scrub planes for restoration (1 – parts missing); #104-9” pressed steel jack w/ Liberty Bell cap, G
$150.00
1452 – Stanley planes: #239 special dado plane w/ fence, missing parts; #39-7/8” dado, missing knick-blade
$70.00
1483 – Various planes: Craftsman rabbet/fillister, G; Ohio Tool Co. (?) #3-C bench jack, F-G; cast brass coach builder’s rabbet circular plane, missing iron, G
$60.00
1503 – Various planes: Craftsman 14”-C bench fore, G; Craftsman 9” smooth jack, G; Union #102 block, G+-Vg
$25.00
151M. Long (Mathias Long, circa 1850, Reading Pa.) slide arm plow plane w/ brass depth adj. screw. The fence has long arms, Vg
$25.00
153Marten Doscher, New York, handled screw arm plow plane, owner marked with 3-ring strike of “Odd-Fellows” lodge. The handle is mounted w/ iron brackets, Vg. Owner’s name on top O.W. Hunt
$50.00
154E.W. Carpenter, Lancaster, slide-arm sash fillister plane w/ wooden depth stop (replaced stop-screw), Vg
$180.00
155E.W. Carpenter, Lancaster, two-iron sash molding plane w/ screw adjustment in brass “eye-shaped” inset, G
$190.00
156Pr. E.W. Carpenter, wooden instrument maker’s clamps w/ threaded road & two-threaded round clamp heads, G-Vg
$70.00
1572 – Lancaster Co. wooden molding planes: I. Schauer (John Schauer, circa 1820, East Petersburg, Pa.) 5/8” dado plane, Vg; E.W. Carpenter, Lancaster rabbet plane, G
$17.50
1584 – Pa. wooden molding planes: Jacob Heiss (1807-1840, Lancaster, Pa.) rabbet, G; 2 – D. Heiss (Dietrich Heiss, 1769-1814, Lancaster City) hollow planes, F+-G; G. Long (eastern Pa.) side-bead, G
$350.00
1592 – Wooden handled panel tongue planes: W. Blair & Co, Chicago, Vg; Galtland (?) w/ tow hole, F-G
$17.50
1607 – Assorted wooden Asian carpenter tools: ink/chalk line box w/ wooden winding wheel; 6 – assorted wooden molding plane, G-Vg
$100.00
1615pcs. Hand wrought hardware: plate-back thumb latch w/ twist-grip handle, F; spring-catch latch plate; garden gate plate back latch lock; 2 – key-operated dead-bolts (missing parts)
$60.00
162Tray lot assorted hand wrought tools & hardware: “bird’s-beak” tongs; 4 – assorted hasps; modern lamp jamb peg hook; 3 - joiner’s drift-pin; assorted bolts w/ “ram’s horn” nuts; etc.
$45.00
1635 – Hand wrought tools: bench clip mounted small tin shears; wagon hitch pin/hammer, G; sleigh “snow-knocker” hatchet, G; Farrier’s claw hammer w/ pry-bar handle, G; primitive demo-chisel
$30.00
1642 – Hand wrought stone layer’s hammers: cobble-stone mason’s scup/hammer, G; approx. 10lb. dbl.-faced bush hammer, F+
$35.00
1654 – Assorted hand wrought tools: wide turner’s stiff-joint caliper, G; dough scraper, F; pruning chisel/hook, G.; tinsmith’s box-top bench stake, G
$40.00
167Tray lot assorted “what’s it” tools: spring operated “Bull-nose” lead; lever operated carpet stretcher; Farrier’s “anti-bite” bridle-plate; Adamson Mfg. Co. patent 4-1-1913, vulcanized rubber patch tool; etc.
$25.00
1697 – Assorted brass tools: Farrier’s brass hoof-pitch gauge, Vg; 2 – French, glass cutting tools; pr. of brass joiner’s wedges; adjustable screw-threading plate, G; pipe flaring tool
$30.00
170Tray lot old advertising tins w/ product *Note- can not ship to on-line purchaser, and oil present. Boston Varnish Co., sealed tin; 2 – 1pint cans Mather “Thousand Mile Axle” w/ carriage scene; Hollingshead Hoof Dressing whale oil-pine tar; 2 – 1pint cans Hollingshead castor axel oil; Baer Bros. bronze-powder “lack pale gold #8”
$110.00
171Tray lot tools in original boxes: Craftsman butt marking gauge; Frank B. Hall, line level; Eberhard Faber lumber crayons; Dietzgen drafting tool kit; Holt Howard “Rake n’ Spade”
$20.00
172Tray lot assorted tools: 2 – small bench mount vises, G-Vg; copper “bull’s nose-ring”; brass scale/or paper weight; U.S. Envelope Co., 12” brass rule, Vg
$55.00
1735 – Assorted hammers: blacksmith’s half round marking tool; square/round dbl.-face planishing hammer, G+; cobbler’s round hammer, G; 2 – cross-peen rivet hammers, F-G
$35.00
1743 – Signed axe heads: Snyder (?) center-bit posthole axe, P-F; P. Schwitzer “True Blue” (Birdsboro, Berks Co.), felling axe, P-F; Schilt (Henry Schilt, circa 1870) “Kent” hand axe, F
$85.00
178R.M. Adams (Richard or Reuben Adams, Robesonia, Berks Co.) upper bit posthole axe, pitted & poor “make-do” handle
$20.00
181Terlitz (*???), European imported left handed, “Goosewing” axe w/ raised weld, & butt plate, G+
$110.00
1853 – Signed, hand wrought drawknives: S. Shoff (*?) 11 ˝” curved back; J. Shertz (John Shertz, Lancaster City) 7 ˝” straight back; Schaefer & Coes (*?) 7 ˝” (all F-G)
$55.00
1864 – Various drawknives: J. Folp & Sprague, 9 ˝” cooper’s head shave, G+; Witherby 10” sag-back, G; unsigned 6 ˝” straight-back, Vg; Douglass Mfg. 7 ˝”, G+
$70.00
1893 – Hatchets: unsigned broad lopping hatchet, G; Gifford Wood Co. ice pick/hatchet, G; fan edge “Cruise” marking hatchet, G
$55.00
1942 – Wooden mallets: shipwright’s lignum-vitae caulking mallet w/ replaced handle, G; Spaulding “roque” mallet w/ turned & carved oak handle, missing 1-rubber head
$65.00
19513 – Assorted gouge chisels, various makers, G-Vg. Makers: W. Butcher; Addis; Buck Bros.; Witherby; J. Howarth; etc.
$95.00
1962 – Tools: Lg. 12” “Scotch” iron brace w/ thumb button lever chuck & wooden knurl, G-Vg; A. Lovejoy, wheelwright’s blocking axe, F.
$25.00
1974 – Various hatchets: Dunlap, shingling half hatchet, G+; Plumb, shingling half hatchet, G; W. Brady (Lancaster Co.) belt hatchet, G+; hand wrought lathing hatchet, G
$45.00
201Tray lot machinist measuring devices: Starrett #436-2”-3” micrometer, Vg; Craftsman 1”-2” micrometer, G; 2 – slide-arm calipers, G-Vg; 3 – magnetic base surface milling gauges, F-Vg
$40.00
2023 – Stanley measuring devices: Stanley #198 brass head dbl.-arm marking gauge, Vg; 2 - #59 doweling jigs, G-Vg
$45.00
203Tray lot assorted measuring devices: 2 – Stanley #106-6ft. “zig-zag” rules in original box, Vg; Evans 100ft. tape measure, Vg; Roe 100ft. tape w/ S.S. case, Vg
$22.50
2063 – Measuring devices: “Rolatape” walking wheel measure w/ collapsible handle & case, Vg; 2 – 100ft. tape measures (1 –Lufkin)
$10.00
2074 – Various brass plumb bobs: B.K. Elliott Co. 16oz. w/ leather sheath, vg; K&E, 12oz., Vg; Standard 12oz., G; Dietzgen 16oz. G-Vg
$55.00
2084 – Stanley measuring devices: #18-8” flush-T bevel, Vg; “sweetheart” #12-4” try square, G; 2 - #89 clapboard siding marking gauges, G
$35.00
2096 – Assorted adjustable wrenches, F-G: Cochran “Speednut” wrench; Bullock 6”; Billings & Spencer #3 slide-jaw; Mossberg #76; International Mfg. “Superior” wagon wrench, F
$50.00
2103 – Multi-wrenches: 2 – Hercules Patent (?) combination wrench,/threading/hatchet/claw w/ ruled edges, F-G+; S&T wrench w/ alligator jaw & threading dies
$100.00
2125 – Assorted adjustable wrenches: Billings & Spencer, 6”, Vg; Billings Patent 7”, G; Hoe Corp, spring jaw, Vg; Wm. Hjorth, pat. 12-15-1896, “Lightning Combination”, G+; Reinhard McCabe Co. model 10, slide-jaw
$35.00
2136 – Various wooden side-bead molding planes, Vg. Makers: Union Factory, H Chapin; H. Spalding, Elmira, NY; Chapin & Kendall, Baltimore; Auburn Tool Co; Marten Doscher, New York; Marples & Son
$55.00
2147 – Various wooden side-bead molding planes, F+-G. Makers: Sandusky; John Bell, Phila. ; Burnham & Bros.; etc.
$50.00
215 8 – Assorted wooden joiner’s planes: unsigned match pr. panel T&G plane set w/ chamfered shoulders, Vg; Greenfield Tool Co. ˝” two-way T&G plane, G+; unsigned single blade sash molding plane, G+; S. Cook, New Brunswick, panel groove, F; C. Prescott, moving fillister plane, G+; 2 – rabbet planes
$65.00
2167 – Assorted, E.W. Carpenter, Lancaster, wooden hollow & round molding planes, G-Vg. (some owner strikes)
$200.00
2174 – E.W. Carpenter, Lancaster, wooden molding planes: 2 – lg. side-bead; wide #18 hollow w/ Jos. D. Frehn owner strike, Vg; 1 5/8” complex molding, problems F
$40.00
2192 – Lancaster Co. wooden tools: Samuel Auxer, Lancaster (Lancaster tool shop, formerly E.W. Carpenter factory) 10” marking gauge w/ wooden stop screw, Vg; J.F. Bauder, Manheim, Lancaster Co. Pa., side bead, Vg
$65.00
2203 – Pa. Wooden molding planes: M. Long (Mathias Long, circa 1850, Reading Pa.) scraper plane, Vg; 2 – E.W. Carpenter, Lancaster: 5/8” skew rabbet, replaced wedge, G+; complex molding, missing fillet strips, F
$22.50
2213 – Early Lancaster Co., wooden molding planes: 2 – D. Heiss: table round, G; hollow, G; I. Schauer, side bead (filet strips missing), F
$240.00
22213 – Assorted wooden hollow or round molding planes, F+-Vg. Makers: Stothert, Bath; Young McMaster; Union Factory, H. Chapin; Owasco Tool Co; Geo. Burnham; Ohio Tool Co.; etc.
$70.00
22310 – Assorted wooden joinery planes, G: 3 – rabbet; Sandusky, dado; 3 – grooving & 2 – tongue planes; Mockridge & Francis, side-bead
$70.00
224Joseph Woodwell, Pittsburgh, Pa’, (very rare ranking), boxwood screw arm plow plane, G+ (light strike)
$140.00
225A. Howland & Co., NY, rosewood handled screw arm plow plane w/ boxwood threads, knobs & stops, G+-Vg (owner strikes on nose)
$110.00
226E.W. Carpenter, Lancaster, handled screw arm panel tongue plane w/ wide fence & hardwood filet strips, G+-Vg. (some thread damage)
$110.00
227E.W. Carpenter, Lancaster, wooden handled wedge arm panel tongue plane, marked 7 on tail w/ 4 – star strikes, G-Vg
$80.00
230Union Factory, Chapin-Stephens Co., screw arm plow plane w/ long screws & 4 - boxwood round stops. The plane has wooden depth stop screw, G
$20.00
2316 – Assorted wooden molding planes, F-G: unsigned, wedge arm sash molding; unsigned, astragal bead; unsigned, side-bead; J. Zimmerman, Kingston, Ohio, side-bead; owner marked quarter-round; unsigned coping plane
$10.00
23212 – Assorted wooden side-bead & bead molding planes, F-G+. Makers: N. Copeland; A. Howland & Co.; Greenfield Tool Co. J. Colton; J.F. Young; Casey & Co.; Sargent & Co.; etc.
$45.00
2343 – Various drawknives: Jonas Paul (*?) 8” stop chamfer, Vg; W. Butcher, 8” G+; James Swan, 14” straight-back, Vg+
$75.00
2352 – Lg. drawknives: unsigned 20” mast-maker’s shave, G+; unsigned cooper’s stave shave w/ long handles, heavy pitting, F
$17.50
2364 – Various drawknives, F-G: unknown, “Safety” folding-handle; Hewes (George Hewes, Peach Bottom, Lancaster Co.) 11” stop chamfer; unsigned 9”; unsigned 9” sag-back, G+
$50.00
2374 – Various scrapers, G-Vg: Stanley #70 adjustable box, missing iron; Stanley set-angle, replaced parts; Stearn & Co. universal adjustable, Vg; Starrett & Co. universal ball-joint, Vg
$40.00
238Tray lot assorted classic machinist tool catalogs, P-Vg: Goodell-Pratt #16-1926; Brown & Sharpe #33-1938;Starrett #26-1938; Starrett #17-1900; 2 - Starrett #15; Brombacher & Co. #20-1922, cooper’s tools; Roessing, Excelsior Fresco Stencils, circa 1915-1919
$40.00
239Tray lot assorted tool catalogs: 2 - Lufkin #7; 2 – Millers Falls #42-70th anniversary; 2 – Starrett #27-1955
$30.00
2408 – Assorted tang handle carving gouge chisels, G-Vg. Makers: J. Howarth; Wood & Co; D.R. Barton & Co.; Thos. Wales & Sons; etc.
$60.00
24210 – Assorted socket handled wood, bench, & firmer chisels, F-G+. Makers: A. Whitney; Douglass Extra; Jennings & Griffin #5; Pexto; Greenlee; etc.
$75.00
2454 – Various wooden marking gauges, F-G: Marples rosewood & brass mortise, cracked fence; rosewood w/ brass stop screw, missing inlay plates on fence; Young, NY. boxwood & brass mortise gauge w/ brass stop screw; wooden marking gauge w/ wood stop screw
$60.00
2463 – “Lancaster Shop” wooden marking gauges w/ Lancaster design stop-screws, G: E.W. Carpenter, Lancaster, 10” (light strike); Samuel Auxer, Lancaster, Pa. 7”; unsigned 7” slide-arm mortise gauge
$40.00
2472 – Drilling devices: Millers-Falls #7740 breast drill, NIB; Goodell-Pratt Co. w/ pat. 8-13-1895, (chuck parts missing) otherwise Vg
$120.00
2483 – Drilling devices: Goodell-Pratt #477 breast drill, Vg; Millers Falls #97 breast drill, G+; Millers Falls #2-A hand drill, G+
$120.00
2496 – Assorted hammers: Brady, Mt. Joy (poor strike) millstone hammer, Vg; unsigned brick hammer, Vg; 2 – stone knapping hammers; 2 – rivet hammers
$40.00
2508 – Assorted hammers: 2 – cobbler’s round poll (1 – Osborne); 2 – ball-peen; 2 – rivet hammers; tinsmith’s dbl.-faced rounding hammers; upholstery hammer, F.
$45.00
2516 – Assorted hammers: 2 – leatherworking (1 – Hammond, Phila. cramping hammer); saw dressing hammer. Metalworking fuller/rounding hammer; 2 – stone mason’s knapping hammers
$45.00
253Unsigned, Conestoga wagon rack & pinion jack, missing base clip, G. Construction similar to Nagel’s of Lancaster w/ star decoration on pin/axel
$90.00
2555pcs. Hand wrought hardware: Conestoga wagon axe holder, simple form half-round shape, P-F; matched set of 4 – lg. 3” wide hanger brackets w/ bird’s head cusps, G
$55.00
2584 – Assorted tools: C.F. Close, Rochester, cooper’s croze plane, G; Stearns & Co. universal scraper, G.; Burl-wood head joiners’ mallet; round head carver’s/froe mallet, G
$22.50
2598 – Assorted adjustable wrenches, F-Vg: Bonney 10”; Little Giant pipe wrench; Elgin alligator jaw; Girard 6” “Monkey”; Acme; unknown axel-nut wrench; etc.
$85.00
260Oak machinist tool box w/ Yale marked latch lock, hinged lid compartment, drop-front door & 5 over 2 interior drawers, minor water damage to base, G+
$280.00
262L.L. Davis Adjustable Spirit Level, pat. 9-17-1867, 6” iron base w/ brass adjustable face, Vg
$90.00
2643 – Early Stanley “star-cap” block planes: #120 w/ R&L patent dated iron; Stanley cap & iron on Sargent #107 bed; #130 (??) dbl.-end block w/ Stanley iron & cap
$45.00
2652 – Metal combination squares: Starrett small frame 6”, G; L. Starrett Co. 12” w/ center gauge & protractor gauge, damaged vial, G
$60.00
2663 – Bench jack planes: Stanley Bailey #4 w/ patent dated chip guard, G-Vg; Stanley Bailey “sweetheart” #5 Ľ “junior” jack, unmarked bed, G (pitting to side of bed); “no-name” 8 Ľ” w/ stirrup cap, F (parts missing)
$80.00
2672 – Stanley Bailey bench planes: #5 jack, post WWII, cracked handle, otherwise Vg; #5 Ľ” “junior” jack, Frankenstein model made up with assorted parts
$40.00
268Stanley #45 combination molding plane w/ knives, Vg. The frame is earlier model w/ floral embossed casting, missing some parts
$240.00
269Stanley “Traut’s Patent” #46 combination plane w/ skew set iron & patent dated grip. The plane has embossed scroll-frond design cast frame, fence & single iron, G+-Vg
$60.00
270Early Stanley Bailey #6 bench fore plane w/ rosewood handle & low knob, replaced blade, G+
$65.00
271*restoration project – Stanley #113 circular/compass plane, pat. date on compass gauge, rust to surface of frame & sole, G
$90.00
272Stanley #55 combination molding plane w/ original oak tool chest, & box loaded with assorted blade. The plane is set-up & appears complete w/ fences, skate, depth adjusters, etc., extensive corrosion & rust, but restorable
$220.00
2732 – Stanley planes: #248 flip-bottom match/T&G plane w/ original box, G; #378 fillister plane w/ fence, missing blade, G-Vg
$70.00
277Craftsman, contractor’s “Plain utility level” transit w/ original wooden box & wooden tripod, F-G
$35.00
2812 – Forestry tools: Plumb “Victory” felling axe w/ leather sheath, Vg; Warren-teed, grubber w/ #713727, F
$65.00
2824 – Various plumb bobs: brass 14oz. in Bolens leather sheath; General Hardware 8oz. brass w/ leather sheath, G+-Vg; unknown, brass 6oz., G; iron hexagon shaped 14oz. G
$45.00
2835 – Assorted measuring devices: iron 16oz. plumb bob, G; iron 6oz. plumb bob, G; 3 – wooden marking gauges, G-Vg. (1 – Stanley #61)
$25.00
2843 – Signed, hand wrought drawknives, G: Hewes (George Hewes, Peach Bottom, Lancaster Co.), 7 ˝”, G; Chickies (Chickies Iron Co., part of Haldeman family furnace in Lancaster Co.)No.2-8”, G.; H.H. Mellinger (Henry H. Mellinger, Washington Boro, Lancaster Co.), 9 ˝” stop chamfer, G+
$50.00
2863 – Signed, hand wrought drawknives: J. Snyder (John, circa 1850, Mt. Joy, Pa.), 11” (lg. chip to edge); D.R. Barnett, Phila. 8” “sag-back”, G+; W. Brady (Wm. Brady, Mt Joy or Lancaster City) 6 Ľ”, G+-Vg
$40.00
288Group of miniature tools: 2 – partial sets of Marx “Pocket Tools” (1 – boxed); small framed wood crafted tools
$40.00
2895 – Assorted hammers: 2 – cobbler’s round hammers, G; signed (?) farriers; (?) “Long nose” rivet hammer w/ iron handle; Vg; initialed brick/stone knapping hammer
$55.00
2904 – Various drawknives: unsigned 8” w/ arch handles, F-G; J. Beatty (John Beatty, mid-1800’s), 7” spoke shave; J.L. Williams (James L. Williams, Phila. 1839-1864), 6” shave; Witherby 8” stop chamfer
$45.00
292Tray lot assorted tools: boot puller/hook w/ vegetable ivory handle, F.; 5 – small rivet hammers w/out handles; Globe-stock Gears gauge plate set, Vg; Stanley grass-shears type 199 cutter blades in box; Gage Tool Co. trade adverting carpenter’s pencil; etc.
$17.50
2934 – Assorted drawknives, G-G+: Ohio Tool Co. 8”; Hudson Handsome, 12”; Jaxon, 10” straight-back; A.W. Grossman, 7”
$75.00
29413 – Assorted firmer, wood, & carving chisels, F-Vg (2 – socket handle). Makers: Buck Bros. Ibbotson; Spear & Jackson; etc.
$75.00
295Goodell-Pratt “Toolsmiths” model 125-18” bench top lathe w/ three-tier fly-wheel (no-motor), Vg
$130.00
29619 – Assorted wooden simple & joiner’s molding plane, F-G. various makers & type (please look for yourself)
$60.00
2979 – Assorted wooden molding planes: 8 – bead/side-bead, F+-Vg. Makers: Mosely & Son; G. Roseboom, Cinc.; Spencer; Union Factory; etc.; D. Colton, Phila. fenced coping, missing iron
$30.00
2983 – Wooden molding planes: unsigned European type plow plane w/ 3-threaded peg fence, F+-G+; unmatched pr. handle panel T&G planes (Auburn; Union Factory)
$30.00
299Speight Leeds, wooden screw arm plow plane w/ boxwood threads, knobs & notched round stop plates. The plane has brass depth adjuster w/ screw in brass sight-plate, G. (thread damage)
$25.00
30014 – Assorted wooden molding planes, various makers & types, F-G+: unsigned ovolo w/ astragal bead; Kennedy & White, tongue; 5 – rabbet molding; various hollow & rounds
$90.00
3012 – Wooden plow planes: M&A Copeland, slide-arm w/ wooden stop screws & wooden depth stop w/ wood stop screw, G; F. Dallicker (Frederick Sr. or Jr., Montgomery Co., Pa., circa 1810-60) wedge arm w/ brass depth adjuster, Vg
$55.00
3023 – Philadelphia wooden molding planes: R.A. Parrish, center bead; A. Wheaton, quirk & bead complex molding, F; Butler, quirk & bead, F.
$130.00
3032 – D. Heiss (Dietrich Heiss, 1769-1814, Lancaster City) molding planes: quirk & astragal bead w/ hardwood biscuit boxing, G; side-bead, F-G
$230.00
3042 – Lancaster Co. wooden molding planes: E.W. Carpenter, Lancaster, Grecian ovolo, owner marked P.C. Hensel (*?), F-G; I. Schauer (John Schauer, circa 1820, East Petersburg, Pa.) reverse ogee w/ fence, G.
$45.00
3052 – Lancaster Co. wooden molding planes: E.W. Carpenter, Lancaster, screw-arm sash molding plane w/ boxwood threads, stops, & filet strips (great cleaning project); D. Heiss (above noted) wedge arm plow plane, F.
$325.00
30610 – Assorted simple & joiner’s planes, various types & makers, P-G
$7.50
3073 – Assorted bench planes: OVB “self adjusting” #5-C, G; Goodall, 9 ˝” smooth jack, G+; Shelton #4 smooth jack, Vg
$60.00
3084 – Various bench planes: “no name” 9 Ľ” smooth jack, G+; Stanley “Handyman” #1203, Vg; OVB #3, F-G; Stanley Bailey #4-C, P-F
$70.00
309Casey & Co., Auburn, NY. 2 ľ” crown molding ogee plane w/ side-mount fence-rail (2 3/8” iron), Vg
$45.00
3103 – Wooden planes: J. Colton, Phila. 17” bridge builder’s skew-rabbet plane, missing 1 – knick-knife; homemade mixed hardwood round-block plane, Vg; rosewood V-groove, missing fence & arms
$25.00
3116 – Assorted long-shaft engineer’s screwdrivers (several hand wrought). Makers: Stanley R&L; The Douglass “Extra”; W. Keely; W.M.W.
$35.00
3125 – Assorted tools: L.S. Starrett “universal” adjustable scraper, Vg; Stanley #923-10” ratchet brace, G+; 3 – assorted “monkey” wrenches, F-G
$30.00
3133 – Transitional type bench planes: Chaplin’s Patent 6-7-1872, by Tower & Lyon, 22” (repaired handle), Vg; “no name” 15” (replaced & missing parts); unsigned 16” hardwood fore plane w/ brass infill raise handle, G+
$45.00
3144 – Various marking gauges: Shodl (?) patent 3-8-1864, 3-rail combination w/ hexagon shape rail, Vg; pat. 6-7-1891 “twist-tight” adjustable fence, Vg; Goodell-Pratt Co. 2-rod butt roller marking gauge, G; etc.
$85.00
316Wm. Yong, Phila. 15” brass “Dumpy” engineer’s sight level w/ original wood case (lenses need cleaning)
$45.00
3172 – Gage Tools Co. transitional bench planes: 9 3/8” raise handle smoothing jack, G; #14-18” jointer, Vg
$40.00
3185 – Assorted block planes: Birmingham Tool Co. 5 Ľ”, Vg; Defiance press-steel; Craftsman #619-…, G+; Stanley: R&L #104, G (replaced knob); #9 ˝, F
$55.00
3192 – Improved rabbet planes: Millers Falls #95 rabbet/fillister, missing fence; Stanley #190, Vg
$55.00
3202 – Measuring devices: “no name” 11 ľ” brass & hardwood machine level, G+-Vg; Stephens & Co. 12” combination bevel-rule w/ two brass bevel arms, G+
$15.00
322Tray lot 8 – assorted shoe makers tools: shoe peg shave; Belcher Bros. wooden shoe size measure, G+; 6 – assorted iron shaves (round heel shaves & edge trim)
$35.00
3232 – Wooden raise handle bench fore planes: 16 ˝” Lignum-vitae w/ Sargent & Co. iron, G+ (initialed J.E.R.); Auburn Tool Co. 16” Vg
$10.00
3244 – Various wooden molding planes, G-Vg: 2 – handled panel grooving planes: D.R. Barton, Rochester; Benson & Mockridge; Greenfield Tool Co. #396-1” panel tongue plane; 1” long rabbet w/ brass inlay bracing
$15.00
3253 – Various planes: signed (??) 8” smoothing block w/ iron throat plate, cracked G; D.R. Barton & Co. #22-1 ˝” nosing plane, G; Sargent #708 jack, F
$45.00
326Stanley Gage #G6 bench fore plane w/ self-setting iron, re-painted upper of deck, pitting to sole
$65.00
327Tray lot assorted tools, G-Vg: 3 – spiral screwdrivers: Millers Falls #61A; 2 – “Yankee” #35; 3 – various push –drills; 3 – small iron pocket/machine levels: Millers Falls Co. 2 ľ”; Richardson 4”; unsigned 5 7/8”
$35.00
3283 – Henry Disston & Sons, Keystone Tool Works, wooden levels, F-G: #05-18” cherry wood; 18”; 20”
$30.00
3292 – Tools: Akron Eclipse Level #5-30” brass framed mahogany level, G; Keystone K3 “Pacemaker” 20-9pt. handsaw w/ track race graphics, G+
$10.00
3302 – Handsaws: Disston 26”-8pt. w/ mid-century aluminum frame handle, G; Warranted Superior 16” steel back mitre saw, F-G
$15.00
3324 – Assorted hatchets: 3 – shingling half-hatchets, G+-Vg: Germantown, USA; True Temper, #OH; Germantown “GTW”; Barney & Berry hand axe w/ red paint, vg
$45.00
3332 – Handsaws: Geo. Bishop & Co. #B80 w/ E.K. Larimer Hardware Co. (handle damage); Atkins #000-26”-8pt. w/ plastic grip, G-VG
$10.00
3342 – Disston & Sons handsaws: #D95-12pt. w/ resin grip, G+; #D8-26”-8pt. sway-back, hole drilled in handle
$17.50
3352 – Tools: Stanley #237-24” aluminum frame level, Vg; Black Diamond Saw Co. 26” “sway-back” hand saw, handle cracks
$30.00
3362 – Disston & Sons handsaws: #D20-24”-11pt., Vg; #D8-26”-5 ˝ pt. w/ finger-hole handle, G+
$80.00
337J. Beatty (John Beatty, mid-1800’s) 3” socket handle slick w/ off-set handle, Vg. (handle rough from use w/ mallet
$160.00
341Unsigned, 14” right-hand goosewing axe w/ off-set tapered socket handle, “tombstone” design key, 3 – sunburst tool strikes & initial X.I.. The tail of beard has round file accent. The weld has 3 – rib accent. G+-Vg. Probably Pennsylvania German (Berks Co???)
$1,150.00
3424 – Assorted drawknives: Stanley #66 Universal hand beader, missing fences & blades; unsigned 7” “sag-back” G+; Stearns 2” spoke shave, G; wooden spoke shave w/ 3” iron
$50.00
3436 – Assorted tools: 4 – hand wrought nail pincers (1 – w/ diamond faceted handle); odd Farrier’s claw hammer w/ octagon tapered poll (initialed CAM); unsigned rivet hammer, Vg
$17.50
3443 – Hand wrought butchering utensils: matched pr. ladle/skimmer w/ rattail hangers on flatwork handles, Vg; unsigned 4-tine kettle fork w/ octagon shaft & hooked top flatwork handle, G+
$20.00
345Shoe box filled w/ shoe repair tool, & hardware: pincer; round hammer; awl; knives; Hood Rubber Heals trade box w/ policeman; etc.
$55.00
346Tray lot assorted primitive tools: field cutter honing stone horn w/ belt hook; disc shaped hog scraper, Vg; wrought iron gouge chisel w/ socket top octagon shaft handle; 4pc. grain painting comb set; Millers Falls #610 spiral screwdriver, G+
$15.00
3473 – Tools: slate roofer’s zaxe/hammer, G+; Cooper’s 7 ľ” 6-spoke wheel traveler w/ turned wood handle, G; 10” stiff-joint outside caliper, G
$40.00
349Tray lot assorted drilling devices: Goodell-Pratt Co. #0477 breast drill w/ changeable gears, Vg; Sargent & Co. adjustable hollow auger, missing depth stop; 1” fixed hollow auger, G; 2 – various spoke pointers
$70.00
3503 – Various block planes, Vg: Stanley: “sweetheart” #18 w/ nickel-plated knuckle-joint cap; #220; Fulton #3700, NIB
$40.00
351Stanley R&L #12 ˝ adjustable veneer scraper plane w/ hardwood sole plate w/ rosewood handle, Vg
$75.00
3554 – Early wrought & cast iron primitives: wrought iron spike puller w/ socket for long wooden handle, P; masonry spike “horse tie”/hook w/ floral leaf shield plate; odd three-size shoe last; wrought iron mounting bracket
$5.00
3583 – Primitive tools/parts: brass frame pod smoothing iron w/ wood grip, missing stop gate & damaged front post; butcher’s small beam scales, now weights; 18th or early 19th century 15” mincing/rocker knife, initialed I.K. w/ 4 sun-burst tool strikes, F
$5.00
359Joseph Freyenschlag (Austrian/Prussian) 56” two-man saw w/ rocker shaped blade, F-G. The saw has deep set trademark strike w/ I.F. & goat strike
$20.00
360Oak, Sargent VBM bench top tool cabinet w/ brass tag. Chest has box-joint construction w/ hinged door, interior drawer & drop-handle chest top tote, G. (no tools)
$65.00
3613 – Various tools: Swan Co. “James Seymour patent” adjustable hollow auger, patent 6-29-1894; Cooper’s 10” outside/hollow shave; homemade cooper’s inside buzz/pail shave w/ brass throat plate, G+
$25.00
362Metallic Plane Co. “Palmer’s Patent, 6-14-1867,” 20 ˝”-C bench jointer w/ adj. throat plate, G
$60.00
364Metallic Plane Co. “Palmer & Storke’s Patents” 20 ˝”-C bench jointer w/ adj. throat plate, G-G+
$70.00
3653 – Stanley planes/parts: Bailey #5 jack, chipped rail, G; 2 – frames for Millers Patent #43 combination plane (frames only)
$45.00
367Tray lot of 4 – measuring devices: Stanley #12-12” try square, G+; unsigned, 16” outside caliper, G+; H. Chapin, Union Factory, #12-24” four-fold wooden rule w/ brass arch joint, Vg; unsigned, wooden 2-rod marking gauge, G
$10.00
3692 – Vintage tool catalogues: Richard Melhuish Ltd. Woodworker’s Tools and Machines catalogue #25-1925,; Sargent, Locks & Hardware, catalogue #42-1942
$22.50
3713 – Various wooden screw-arm sash molding planes: unsigned w/ hardwood boxing, Vg; J.T. Brown (Baltimore, Md.) G; Ohio Tool Co., F
$45.00
3742 – Early 18th century Moravian type plate-back spring catch door locks (1 – complex w/ dead-latch), F
$30.00
3785 – Unmatched, hand wrought side hinges, various forms: ram’s horn; “blooming” tulip; Diamond-center plate; etc.
$17.50
3805 – Unmatched, hand wrought side hinges: Cock’s head cusp; “mustache”; “blooming” tulip; etc.
$20.00
3853 – Early hand wrought box locks, P-G: complete latch lock w/ “Eye” shaped press-pads, finial shaped dead-bolt handle; “Alms House” incomplete encased plate lever-latch w/ thick key operated dead-bolt; incomplete spring-catch lock
$22.50
3864 – Various hand wrought blanket chest “grabber” locks, P-F. (2 – w/ incised tool decoration)
$30.00
3883 – Various, hand wrought box locks, F-G: key-operated “dead-bolt”; completed “round pad” elbow latch lock w/ key operated dead-bolt; incomplete “eye pad” elbow latch lock w/ key operated dead-bolt
$17.50
3893 – Assorted early locks: over-sized plate back lever latch, P; complete box lock w/ oval push-pads, F; box lot frame w/ acorn escutcheon cover (no handles), two dead-bolts
$17.50
3927 – Unmatched, hand wrought blanket chest “wrapped-pin” strap hinges w/ various cusp/tips: bird’s head; closed tulip; etc.
$30.00
3942 – Early hand wrought plate-back spring operated lever locks, P-F: incomplete, ornate plate w/ scroll-work handle; complete, interior door w/ oval pad handle
$30.00
3963 – Early, door locks w/ plate-back spring operated lever locks, P-G (2 – complete w/ matched handles)
$50.00
3973 – Various box lock: complete lever latch lock w/ key operated dead-bolt & slide bolt (cast oval push pads); partial w/ round push-pad & key operated dead-bolt; elbow lock w/ key operated dead-bolt, P
$30.00
4024 – Unmatched, hand wrought plate-back door locks, P-F: 2 – spring operated slide-bar latch lock; 2 – interior spring-operated lever-latch lock (1 – w/ exterior bar handle)
$30.00
4033 – Complete, hand wrought lever-latch locks w/ plate-backs, interior & external matched handles, P-F+
$50.00
4043 – Ornate hand wrought side-hinges (ram’s horn type): bird’s beak cusp; file-work acorn cap; rounded cusp w/ file-work edge
$50.00
4065 – Assorted locks: box case spring operated slide-bar latch lock w/ slide dead-bolt; 2 – small cabinet locks; mid-late 19th century blanket chest “grabber” lock (box case); Victorian box lock w/ brass handle slide-bar catch & key-operated dead-bolt
$7.50
408Tray lot wrought iron hardware: 5 –unmatched, ram’s horn side hinges; assorted pintles & door clip
$40.00
412Buck Bros. 4” socket handle slick w/ fine replacement handle, cleaned but pitted surface (excellent user model)
$150.00
413Wm. Beatty & Son, (Phila.) left hand side broad axe w/ modern off-set handle, chipped edge, G+
$65.00
4143 – Keystone handsaws, Vg: #K-4 “Air Master” 8pt. w/ bi-plane graphics & hardwood handle; #K-1-8pt. “Leader” w/ horse race scene; #K-4 (no graphics)
$25.00
4153 – Disston handsaws: #D-115-9pt. “Victory” model w/ Eagle & Liberty Bell graphics, Vg; “Acme” #120, G: 8pt. “Special”, G+
$100.00
4163 – Disston handsaws: 2 – “Henry Disston & Son” marked w/ brass split-nuts, G-G+; Disston & Sons #12-22”-11pt., G+
$100.00
4173 – Disston handsaws: #D115-10pt. “Diamond Jubilee, 1840-1915’, G+; #D-85-11pt. w/ two-tone resin handle, G+-Vg; 26” Mitre box saw for Stanley “sweetheart”
$60.00
4182 - Wooden levels: W. Johnson, Newark, NJ. 30” adjustable, G-G+; Stanley R&L -28” mahogany brass bound, G
$20.00
4192 – Wooden levels: Goodell-Pratt, 30” brass bound & capped rosewood level, owner engraved “T. Wick” Stratton 24” brass bound & capped mahogany level, G.
$45.00
4213 – Measuring devices: Stanley R&L #3-16” cherry wood level, G-G+; Goodell-Pratt, 24” iron level, G+-Vg; Eagle Square Co., pat. 1-22-1907, “knock-down” framing square w/ canvas sleeve, G+
$50.00
4223 – Drawknives: 2 – D.R. Barton: C9-10”; “1832” 8” heading knife, G+; “Perfect Handle” 12”, G-G+
$90.00
4252 – Felling axes: “Richcon” Richards & Conover embossed, F-G; M.W.H. Co. “Hand Made”, double-bit, F
$501.00
4275 – Various brass plumb bobs w/ steel tips, G-Vg: Dietzgen 16oz. NIB; Dietzgen 8oz., Vg; Globe 14oz. Vg; 2 – unsigned
$65.00
4283pr. Trammel points on rails: O. Tomlinson, brass & iron tip on original 18” rail, Vg; sm. nickel-plated set w/ 2 ˝” pin-point, Vg; unmarked brass & iron on 17 ˝” rail, G+
$75.00
429Tray lot assorted hand drills & screw drivers: Yankee #41, original box, Vg; Millers Falls #29, NIB; Millers Falls, hand drill; etc.
$15.00
4304 – Stanley iron planes: #5 bench jack w/ original box, Vg; #3 smooth jack, Vg; 2 - #101 block planes, G+
$120.00
4314 – Bench planes: Stanley: Bailey #5-C jack, G; “Handyman” #H104, blue paint, Vg+; “Two-tone” 9” Vg; Union Mfg. Co. 8 ľ” smooth, G+
$75.00
4332 – Stanley planes: Bedrock #603 square rail, rosewood handle & knob, Vg; #40 ˝ scrub plane, replaced handle & knob, F-G
$200.00
4353 – Various block planes: aluminum #A18 w/ knuckle-joint cap, Vg; Sargent #5206 press-steel, Vg; Hercules 6” pressed steel, Vg
$55.00
4365 – Various shaves: Stanley: #66 universal bead, F; 2 - #51, G-Vg; #151 adjustable, G+-Vg; Martin’s, Vg
$85.00
4379 – Small adjustable & combination wrenches, G-Vg: Sterling #2; B&C #80-4”; “U.S. Separator”; Germany, slide-jaw; etc.
$60.00
4383 – Stanley bench planes, Vg: “Two-Tone”: blue-yellow, 9”; gray-red, 9”; maroon-yellow, 9”; Victor #1104
$110.00
4403 – Stanley “with box” tools: Bailey #4 jack, G+; #82 adjustable scraper, G; #75 bull-nose rabbet, Vg
$130.00
4412 – Various tools: coachbuilder’s “double-pistol” router w/ brass adjustable fences, missing one wedge, G+; Wm. Beatty #1-8” meat cleaver, refinished G+
$85.00
442Tray lot assorted tools: 6 – assorted pocket multi-tool holders, F-Vg; 2 – shingling half-hatchets: Dunlop 24oz.; Germantown, 16oz., “Crooked” handle knife, G
$60.00
4442 – Block planes w/ wooden wedges: Metallic Plane Co. 5 ˝” w/ Excelsior cutter, Vg; Metallic Plane Co. (??) 5” low angle, cracked stirrup
$60.00
4513 – Large plumb bobs: millwright’s iron tipped brass w/ acorn screw cap, denting; heavy lead plumb bob; 2lb. iron, G+
$100.00
4523 – Heavy plumb bobs: J. Kuker, Seattle, 64oz. brass w/ steel tip, G+; 64oz. (?) brass encased w/ screw cap, F-G; machinist made 3lb. steel w/ threaded cap
$110.00
4533 – Various bench planes: Stanley “sweetheart” #40 scrub plane, G+; Millers Falls (#4 size) smooth jack, Vg; Fulton 7 Ľ” smooth jack, Vg
$160.00
4544 – Measuring devices: 2 – Stanley #30 angle divider gauges, G-Vg; “Make-do” (???) #30 angle divider gauge w/ wood shaft; “12-in-1 Tool”, Nashville, brass combination rule, pat. 7-19-1927,
$65.00
455Tray lot assorted leather working tools: 3 – various pistol grip slitting gauges; stitch marker; Hyde, edge trim; various form tools for shoe repair
$95.00
4564 – Various wooden folding rules: Chapin-Stephens brass bound combination bevel/rule/level, G+; 3 – Stanley: #58 ˝-2ft. brass bound 6-fold; “sweetheart” #84-2ft; #62C-2ft. caliper/rule, G
$120.00
4574 – Assorted block planes: Stanley: #203, G-Vg; 3 – Various “L. Bailey’s Patent” 6”, G+-Vg
$120.00
4587 – Assorted small adjustable wrenches: Gellman Mfg.; Boos Tool Co; Rogers, Printz & Co.; Billings & Spencer Co.; etc.
$65.00
460National Cabinet Co., cloth covered machinist’s tool chest w/ 10 – oak front drawers behind fold-down door, refinished, Vg
$140.00
461Unsigned, Pa. German right hand “Goosewing” axe w/ 15 Ľ” edge raised chip deflector, & improved flat butt. The axe has “Tree of Life” design, two tulip strikes, and “trinity around the world design”. Axe has fine tapered socket handle
$260.00
4633 – Keystone handsaws: #K-3-9pt. “Pace Maker” w/ track graphics, Vg; #K-4 “Air Master” w/ B-17 “flying fortress” graphics, G+; #K-4 (no graphics)
$20.00
4644 – “Boy’s” handsaws, F+-G: Disston & Sons: 2 – 11 ˝ ”; #4- back saw “Chicago Board of Education”; Stanley #780-16”
$95.00
4663 – Disston & Sons handsaws: 16” “Made expressly for Manual Training Schools”, G-G+; “American Boy” 20”, F; #D-23-10pt. Vg+
$50.00
4673 – Handsaws: Keystone: #K-4 “Air Master” w/ flying fortress graphics, G+; #K-2 “Speedster” w/ car graphics, G; Disston & Son 12” “Boy’s” saw, F
$35.00
4682 – Wooden levels: The Baker, Standard Eclipse #727-30” brass capped “3-ply”, G+; The Baker, #3-28” Akron Eclipse level, G+
$7.50
4692 – Drawknives w/ adjustable handles: Enders “Oak-leaf” 9”, pitting to surface; Palmer Bros. (??) 10”, G
$45.00
4703 – Large drawknives: Wm. Beatty & Son, Chester (w/ bull) 12”, G-G+; 2 – Cooper’s heading knives (1 – Barton & Co., Rochester), G
$80.00
47310 – Assorted socket handle firmer chisels, G-Vg. Makers: Douglass Mfg.; Blue Grass; Pexto; Wards; Witherby; etc.
$95.00
47410 – Assorted socket handle firmer chisels, G-Vg. Makers: Jennings & Griffin; James Swan; Samson; Buck Brothers; etc.
$95.00
47510 – Assorted tang handle gouge chisels, G-Vg. Makers: D.R. Barton; Buck Bros.; W. Butcher; etc.
$65.00
4765 – Assorted Mitre/backsaws, G+-Vg. Makers: Mound City; Babbit; Jackson; Pennsylvania Saw Corp.
$90.00
4822 – Planes: Stanley #3-C bench jack plane w/ V-strike (1912-20), Vg.; Craftsman (by Stanley) #3732, in original box
$70.00
4832 – Stanley veneer scraper: #81 w/ raise handle/nickel plate, G; #12 adjustable veneer scraper, G+
$75.00
4842 – Stanley planes: #80 box scraper plane, V-strike on keeper, Vg; “sweetheart” #78 rabbet/fillister, Vg
$95.00
485Early, Stanley R&L Bailey #8 bench jointer, w/ rosewood & handle & low knob, pat. 1887, adjuster wheel, pre-1910, Vg
$150.00
4885 – Assorted plumb bobs, G-Vg: 3 – brass w/ steel tips; 1 – brass round cylinder; 1 – stainless steel 8oz.
$45.00
4893 – Brass & wood mortise gauges: Nelson Standard (?), Middletown, Ct.; 2 – Stanley #92 butt-mortise slitting gauges, G-Vg
$60.00
4902 – Wheel travelers: 7 ˝” dia. brass wheel w/ 3- “running leg” braces, G; hand wrought 7 ˝” dia., F-G
$45.00
4934 – Starrett #87 plumb bobs w/ original boxes, Vg+: 4”; 4 7/8”; 5 ˝”; 6 ˝” (3 – w/ mercury!!! *Note- no shipping)
$210.00
4944 – Various plumb bobs w/ original boxes: K&E, brass 16oz., E; Lufkin brass #587 square, E; Berger, brass 14oz., E; OVB, steel 6oz.
$60.00
4984 – Assorted tools: wooden frame bow saw w/ Jennings Co. blade, needs assembly; stair builder’s saw w/ 3-ply wooden horned handle, Vg; (?) #42 combination bevel/rule, P; Stanley R&L bevel/square, F
$15.00
4994 – Handsaws: 2 – Disston: #68 dovetail saw w/ turned handle, G+; 9” iron back hack saw, G+; Atkins #25-10” dovetail saw w/ steel back, G+; no name dovetail w/ turned handle, Vg
$40.00
5003 – Tools: turned burl-wood carver’s/joiner’s mallet, Vg; “BBB” embossed shingling half hatchet, F; Farrier’s shoeing claw hammer, G+
$55.00
5017 – Assorted hammers, G+-Vg: 2 – Plumb, ball-peens; 2 – dbl.-face planishing hammers; brass upholstery tack hammer; upholsterer’s claw hammer; body-work pin-round hammer
$75.00
50310 – Assorted firmer chisels (most socket handle), G-Vg. Makers: Stanley; Pexto; Witherby; Buck Bros.; etc.
$65.00
5056 – Assorted small wooden molding planes, G+-Vg: unsigned left-right side bead; coachbuilder’s coping; assorted hollow & round
$50.00
5092 – Wooden lumberman’s rules: hickory & brass octagon board foot cane w/ brass caps on both ends, G+; Lufkin (?) #43 6-tier straight board foot rule
$70.00
5112 – Stanley bench planes: “sweetheart” #62-14” low angle, chipped throat & replaced handle; Gage #4 bench jack, cracked handle, G
$120.00
5142 – Stanley Bailey bench planes: #3 smooth, type 11, G+-Vg; #3-C, pre-WWII, chipped front left rail, F+-G
$95.00
5166 – Assorted plumb bobs: 4 – various steel tipped brass; brass 16oz. round cylinder, G; millwright’s (?) octagon tapered iron w/ brass cap, F-G
$45.00
5172 – Planes: Stanley #62-14” low angle bench plane, chipped throat (as is); AMT brass edge rabbet (similar to #95), Vg
$80.00
521Homemade, mahogany tool chest w/ hinge front door that has saw slots, & 2 – interior drawers w/ porcelain knobs. The chest has leather handle, Vg
$354.00
5222 – Stanley Bailey bench planes: “sweetheart” #5-C jack, G+-Vg; “sweetheart” #4-C jack, G+-Vg
$120.00
5233 – Various bench planes: Sargent VBM #409, G+-Vg; Millers Falls #8 jack, Vg; Keen Kutter #K120 block, Vg
$45.00
5252 – Stanley planes: #12 adjustable veneer scraper, G+; “sweetheart” #191 improved rabbet plane, G+
$70.00
5263 – Various planes: Stanley “Handyman” #H104, Vg w/ original box; Keen Kutter 8” transitional block, G+-Vg; Union, New Britain, CT. #23 transitional block, G
$25.00
5272 – Stanley Bailey bench planes, G+-Vg: #3 smooth jack w/ 1902, patent date; #4 smooth jack w/ V-strike (1912-20), G+
$110.00
529Tray lot assorted modern tools: AMT brass edge rabbet plane (similar to #95), Vg; set of 3 – English, wood handle molding scrapers, NIB
$55.00
5302 – Stanley planes, G-Vg: #78 rabbet/fillister plane; #12 adjustable veneer scraper w/ rosewood handle
$85.00
5322 – Stanley Bailey bench planes: #4-C bench jack, post WWII, G+; 13 ˝” jack w/ L. Bailey, patented chip-guard & R&L blade. The sole is unmarked, G-G+
$85.00
5333 – Transitional Stanley Bailey bench planes: #27 fore, G+-Vg; R&L #26 jack, G; “sweetheart” #28 jointer, G+-Vg
$90.00
534Tray lot assorted (like new) tools: 2 – Stanley #59 doweling jigs (1 w/ box); General #810 adjustable edge sharpening gauge
$30.00
5382 – Wooden planes: Henry G. White, Phila. handled wedge arm panel tongue plane, G; Walnut “old woman’s tooth” router w/ fine molded frame, G+
$35.00
5392 – Stanley #45 combination molding planes w/ one set of blades (1 – nickel plated & 1 – japanned) G-G+
$190.00
541Tray lot assorted modern trade advertising & some small tools: 6 – “Proud of Past” Stanley posters; repro- #110-1911, Stanley Tool catalogue; assorted printed tool trade broadsides; Stanley replacement blades; 3 – various small trade rules
$35.00
542Tray lot assorted tool company manuals & literature. Various makers, including makers: W.T. Valentine & Son; Winchester, 1923, pocket catalogue; Ohio adjustable planes; Backus Mfg. Co.; Atkins “Saw Sense”; etc. (some reproduction)
$60.00
5434 – Claw hammers: Plumb “Autograph” 16oz., G+; Shapleigh’s 16oz., G; Standard 16oz., G; Stanley 6oz.
$10.00
5446 – Assorted tools, Vg: 3 – specialty or trade advertising tape measures (1 – Lufkin “Gro-tape” w/ baby face); unsigned belt hatchet/ hand axe; Germany, 3oz. rivet hammer; dbl.-head body repair hammer
$85.00
546Tray lot assorted measuring devices: “Rustless-Rule” 48” zig-zag, pat. 8-5-13; 3ft. wooden zig-zag rule w/ Gasstrom & Benson patent papers; Stanley R&L #61-2ft. four-fold rule, Vg; 7 – assorted pocket tape measures
$12.50
Catalogue Reference codes:
E | Excellent condition | Nearly new condition with original finish and no noted damage. |
VG | Very Good condition | Small cracks in wooden parts, no repairs. Has minor loss to original finish. Ideal for collector’s or display purpose. |
G | Good condition | Minor cracks in wood parts, repairs may be needed for use, has substantial paint or finish loss. Minor rust damage on iron planes & tools. Ideal for users or those wishing to refurbish for collection. |
F | Fair condition | Substantial cracks to wooden or metal parts. Most parts still intact, but may have had substantial repair or replaced parts. Major rust damage. Needs attention or repair prior to use. Good for parts. |
P | Poor condition | Major damage or altered pieces. Has deep pitted rusting to iron & metal pieces. Good for parts use only, or major repair work. |
Cataloguer’s note: This list is a guide that contains our description of each piece. We used several tool references, guides and years of experience handling these tools to create these descriptions. However, many pieces are hand wrought for a particular purpose and no reference to their use exists.
“Rarity” is a very difficult attribute to determine, but we considered how often these pieces have come across our auction block in the past several years to make that distinction. This may not always be in agreement with all price or collector guides.
The conditional reference was done in a fashion that we felt described the quality or condition of each piece. Please refer to the chart above.